Corporate Headquarters
Fastorq, LLC
1215 Peters Road
Harvey, LA 70058
Phone: 504-392-2579
Fax: 504-392-1688
Toll Free: 1-800-837-7117
Pipeline & Facilities
Fastorq Pipeline & Facilities Group
1037 Freeman Rd.
Broussard, LA 70518
Phone: 337-839-0441
Fax: 337-839-0446
Toll Free: 1-888-651-0707
Pipe & Casing Cutting
Overview
With increasing concern for safely cutting casing, without the use of torches, Fastorq offers four types of saws to meet the various needs for cutting casing, pipe and other tubulars.
Our Guillotine saws are intended to quickly and safely cold cut multiple strings of casing for removal, reclamation and/or disposal.
The Wachs Trav-L-Cutter is used to cut and bevel pipe that needs a dressed edge. It can also be used for excessively large diameter cuts, too large for any other saws.
The D.L. Ricci Clam Shell split frame saw is low profile. It cuts and bevels casing for installation. It is lightweight and helicopter portable.
Our new Super Band Saw slices through pipe up to 48" in diameter.
With this variety of approaches Fastorq can safely and flamelessly address virtually any casing or pipe cutting requirement present in the industry.
Applications
- Multiple strings to be pulled for slot recovery or P & A efforts
- New casing installations needing a beveled edge
- Any time flameless operation is a must
- Underwater external pipe cutting applications
- Special situations where larger than 30" pipe requires cutting
Features & Benefits
- Enhance safety by eliminating the need for the use of torches
- Quickly and reliably cut a wide range of pipe sizes
- Cut underwater
Capabilities
- Safely cutting pipe sizes from 2" and larger
- Flameless and clean casing cutting
- Cut multiple strings of casing simultaneously
- Cut underwater by remote if needed
Mechanical Pipe Cutting/Casing Cutting Equipment
- 3 Models cuts 2" - 32" Air or Hydraulic Operated
- Cold Cut Tubing & Casing
- Easy Set-up, Vertical or Horizontal
- Fast Cutting for Removal of Tubing
Mechanical Pipe Cutter
Portable Design to Simultaneously Sever and Bevel
- Machine Casing Stubs for Wellhead Replacement
- Lightweight-Helicopter Transportable
- Low Profile
- Counter Boring
| MODEL | A | B | C | D | E |
| NB6 | 11.375 | 6.875 | 3 | 2.25 | 4.5 |
| NB10 | 15.75 | 11.25 | 3 | 2.25 | 4.5 |
| NB12 | 17.75 | 13.25 | 3 | 2.25 | 4.5 |
| NB14 | 19.75 | 14.5 | 3 | 2.25 | 4.5 |
| NB16 | 21 | 16.5 | 3 | 2.25 | 4.5 |
| NB20 | 25 | 20.5 | 3 | 2.25 | 4.5 |
| NB24 | 29 | 24.5 | 3 | 2.25 | 4.5 |
| NB26 | 31 | 26.5 | 3 | 2.25 | 4.5 |
| NB32 | 37 | 32.5 | 3 | 2.25 | 4.5 |
| *in inches |
The Wachs Trav-L-Cutter is a portable milling machine. It makes cold cuts and/or bevels at the same time on all pipe sizes from 6" and up, on all pipe schedules, and on any material that can be machined. Secured by its own tensioning chain, it crawls around the pipe, cutting and/or beveling at the same time.
- Air or Hydraulic Operations
- Safe Cold Cutting
- Machine Shop Accuracy
- Drilling, Pipeline or Underwater Use